PCT/SL/EU Series SpringQuick Connectors
Place of Origin
Zhejiang,China
Color
Blue, multicolor, orange, transparent
Mounting
Push-In Connection
Material of Shell
Nylon PA66
Metal Material
Copper
Faster Wiring, Easier Operation
Usually, only a few simple steps are needed — strip the wire, insert it, and press — and one connection can be completed in just a few seconds.
More Stable Contact and Lower Heating Risk
Compared with some traditional connection methods that may be poorly tightened or improperly installed on site, this structure helps reduce heat generation and improve overall electrical stability.
Suitable for Common Household Wire Sizes
Mainstream PCT models usually support solid conductors from about 0.75–2.5 mm², which covers most common household wire sizes.
Good Insulation and Flame-Retardant Performance
The housing of PCT quick wiring terminal blocks is usually made of flame-retardant engineering plastic and tested for voltage resistance and insulation performance, providing reliable insulation protection under normal household 220V conditions.
Compact Structure for Limited Installation Space
PCT quick wiring terminal blocks are compact instructure, take up less space, and make cableorganization easier, resulting in a neater and cleanerinstallation.
Say goodbye to traditional tape wiring methods
Traditional Methods Are Troublesome and Prone to Leakage
Complicated operation, prone to electrical leakage and corrosion, which caneasily cause fires and serious safety hazards.
Quick-connect terminal blocks
Simple to operate, efficient,insulating and flame retardant,with a firmconnection.
Material analysis of push rod type connector
PCT quick-connect terminal blocks/push-rod type connectors generallyfollow this approach: the housing ensures safety, the metal parts ensureconductivity, and the spring contacts ensure clamping. The housing mustprovide insulation to prevent electric shock; the metal parts must ensuresmooth current flow; and the spring contacts must ensure a more stablewire contact and prevent loosening.
Plastic shell: The outer plastic casing provides insulation and protection.
Brass guide strip: Internal brass component ensures conductivity.
Stainless steel snap: Stainless steel snap spring enhances clamping force.
Testing hole: A hole for power testing.
Booster / Entrance hole: Corresponds to the auxiliary clamping structureand wire entry point, respectively.
Wiring method of push rod type connector
Step 1 – Strip the Wire
Use a wire stripper to remove about 8-10 mm of insulation from the wire.
Make sure the conductor is clean and undamaged.
Step 2 – Open the Terminal
Use a screwdriver to press the spring clamp open.
Keep the wiring port ready for insertion.
Step 3 – Insert the Wire
Insert the stripped wire fully into the terminal port.
Ensure no bare copper is exposed outside the connector.
Step 4 – Lock & Check
Release the tool, and the terminal will automatically clamp the wire.
Gently pull the wire to confirm a secure connection.
PTFIX One-input Multiple-output Splitte rWiring Video
Want to see more terminal wiring videos?
Then follow me!
Faster Wiring, Easier Operation
Usually, only a few simple steps are needed — strip the wire, insert it, and press — and one connection can be completed in just a few seconds.
More Stable Contact and Lower Heating Risk
Compared with some traditional connection methods that may be poorly tightened or improperly installed on site, this structure helps reduce heat generation and improve overall electrical stability.
Suitable for Common Household Wire Sizes
Mainstream PCT models usually support solid conductors from about 0.75–2.5 mm², which covers most common household wire sizes.
Good Insulation and Flame-Retardant Performance
The housing of PCT quick wiring terminal blocks is usually made of flame-retardant engineering plastic and tested for voltage resistance and insulation performance, providing reliable insulation protection under normal household 220V conditions.
Compact Structure for Limited Installation Space
PCT quick wiring terminal blocks are compact instructure, take up less space, and make cableorganization easier, resulting in a neater and cleanerinstallation.
Faster Wiring, Easier Operation
Usually, only a few simple steps are needed — strip the wire, insert it, and press — and one connection can be completed in just a few seconds.
More Stable Contact and Lower Heating Risk
Compared with some traditional connection methods that may be poorly tightened or improperly installed on site, this structure helps reduce heat generation and improve overall electrical stability.
Suitable for Common Household Wire Sizes
Mainstream PCT models usually support solid conductors from about 0.75–2.5 mm², which covers most common household wire sizes.
Good Insulation and Flame-Retardant Performance
The housing of PCT quick wiring terminal blocks is usually made of flame-retardant engineering plastic and tested for voltage resistance and insulation performance, providing reliable insulation protection under normal household 220V conditions.
Compact Structure for Limited Installation Space
PCT quick wiring terminal blocks are compact instructure, take up less space, and make cableorganization easier, resulting in a neater and cleanerinstallation.
Product Highlights
Adopting a compact design, it can be easily installed in narrow spaces and realizes efficient wiring layout.It supports tool-free quick connection, saving installation time and greatly improving wiring efficiency.With a high voltage rating up to 250V, it ensures safe and reliable electrical connection.Made of premium brass and engineering plastic materials, it is corrosion-resistant, aging-resistant and long-lasting.Multiple color options are available for easy circuit classification and wiring identification.
Product Application Scenarios
Home Lighting System
Suitable for wiring of chandeliers, ceiling lamps, LED lights and other household lighting devices with safe and stable connection.
Distribution Box & Control Cabinet
Ideal for internal wiring of distribution boxes, distribution boards and control cabinets, greatly improving wiring efficiency.
Sockets & Power Equipment
Applicable to the connection of power strips, extension cords and various small electrical appliances.
Security Monitoring System
Widely used for connecting security cameras, power adapters and low-voltage lines in monitoring projects.
PCT Wiring Method
- Open the Lever
Lift the orange operating lever upward to open the terminal for wire insertion.
- Strip the Wire
Strip the wire insulation to 10–12mm². The applicable wire gauge ranges from 0.5 to 4.0 mm². Ensure the wire core is intact and undamaged.
- Insert the Wire
Fully insert the stripped wire core into the wiring terminal without exposed copper to ensure safe connection.
- Close and Lock
Press the lever down firmly to lock the wire in place. Tool-free operation enables fast and convenient installation.
- Connection Completed
The built-in spring clip tightly clamps the wire to prevent loosening and falling off, ensuring stable and reliable electrical connection.
The entire process of productmanufacturing at ZhejiangShenglin Terminal Factory
Want to see more terminal wiring videos?
Then follow me!
Why Choose Arbolsol Shengling PCT Series Wire Connectors
Arbolsol Shengling PCT series wire connectors are designed to provide reliable, efficient and user-friendly wiring solutions for modern electrical applications. With quick installation and stable performance, they are widely applied in residential, commercial, industrial and DIY wiring projects.
PCT quick connection connectors feature excellent conductivity, superior safety performance and durable structure, which make them the perfect option for professional electricians and global power distribution needs.
Main Advantages
Premium Material: The flame-retardant insulated housing guarantees safety and high temperature resistance.Excellent Conductivity: High-quality copper conductive bars ensure stable electrical performance and strong corrosion resistance.Firm Connection: The high-strength spring clamping structure maintains reliable contact and prevents loosening caused by vibration or mechanical stress.
PCT Wiring Method
- Open the LeverLift the orange operating lever upward to open the terminal for wire insertion.
- Strip the WireStrip wire insulation to 10–12mm². Applicable wire gauge: 0.5–4.0 mm². Keep the wire core intact and undamaged.
- Insert the WireFully insert the stripped wire core into the wiring terminal without exposed copper.
- Close and LockPress down the lever firmly to lock the wire tightly with tool-free installation.
- Connection CompletedThe built-in spring clip ensures stable, secure and long-lasting electrical connection.
PTFIX One-input Multiple-output Splitte rWiring Video
Want to see more terminal wiring videos?
Then follow me!
